ATEN Power over the Net - vzdálená správa napájení, rack

PN0108
ATEN Power over the Net - vzdálená správa napájení, rack

- možnost připojení/odpojení za chodu
- vhodné pro server room management
- káždý port samostatně kontrolovatelný
- možnost prodlevy/sekvence pro start/přednastavení
- přepínání kontroly na lokální a vzdálené
- kontrola až 8 zařízení-napájení
- seskupování portů a skupin s pravidly
- *ovládání přes web browser (v kombinaci s CN-8000)
- SSL 128bit kodování
- 1U do 19" racku výška, včetně montážní sady

*PN0108 není samostaná jednotka - pro vzdálené ovládání je nutno ho propojit např. s CN8000, PN9108, SN0108/SN0116.

V balení:
1x 8-Port Power Over the NET™
1x Napájecí kabel
8x Napájecí kabel pro připojení PC
8x Kabel pro bezpečné vypnutí počítače
1x PON Cable (DB9 F to DB9 M)
1x Manual
1x Rychlá příručka
1x Montážní kit do racku
4x foot pads (nožičky)
1x Software CD
1x Registrační karta

[ENG]

8-Port Power Over the NET™

Altusen's PN0108 is equipped with eight hotpluggable ports for easy server rooom management. Each port can be individually controlled so that users can set the power on sequence and delay time for each port to allow equipment to be turned on in the proper order. On/Off scheduling allows for preset start/shutdowns/restarts on a daily, weekly,monthly basis.The PN0108 is the most convenient, reliable and cost effective way to obtain access to your server room remotely.*


Features


Remote power on / off / reboot control for eight outlets via TCP/IP and a built in RS-232 PON (Power Over the NET™) port
Local power on / off / reboot control via the PN0108's PON port to the computer's RS-232 port
Daisy chain up to 15 additional stations to control up to 128 outlets
Manual switching between Local and Remote access for each port via front panel push button switches
Individual control of each port - users can set the power on sequence and delay time for each port to allow equipment to be turned on in the proper order
Easy setup and operation via a GUI interface
Provides three configuration/management methods: Browser; Telnet; or Console Terminal
Safe shutdown and rebooting for Windows systems*
Overcurrent protection and recovery for each AC port (110 V model only); total port overcurrent protection (both models) - remote users can monitor the outlet status via the GUI interface
Separate circuits for the unit's power and the power to the devices – the power control status menu is still accessible even when an overcurrent condition trips the devices' circuit breaker
On/Off scheduling - allows everything from a one-time start/shutdown, to daily, weekly, etc. starts/shutdowns at user-specified times
Port grouping - perform the same action on a specified group of ports
LEDs for easy status monitoring
Two level (Administrator and User) security
Configuration can be reset
Firmware upgradeable - daisy chained stations receive the upgrade via the daisy chain bus
UL/TUV approved
Multiplatform support: Windows 2000/XP/Vista, Linux, Unix and FreeBSD.

*Safe shutdown and rebooting is supported if the Power Monitor utility has been installed
For more information about KVMs which can connect to PN0108, see Compatible KVM Table

*The PN0108 is not a stand-alone unit. It must be connected to the CN6000, PN9108, SN0108 or SN0116 to access these features

Package Content


1x 8-Port Power Over the NET™
1x AC Source Power Cord
8x Power Outlet Power Cords
8x Safe Shutdown Cables
1x PON Cable (DB9 F to DB9 M)
1x User Manual
1x Quick start guide
1x Mounting Kit :Rack mounting brackets and hardware
4x foot pads
1x Software CD
1x Registration card